315 tons ceramic powder molding hydraulic press

315-ton ceramic powder forming hydraulic press is a 315-ton four-beam four-column hydraulic press produced by Shandong Woda Heavy Industry. It adopts four-column guidance, accurate positioning, stable performance, and PLC touch screen programmable controller, which can observe the entire production pressing process at any time. It has the characteristics of simple operation and high degree of automation. This machine is mainly suitable for special powder pressing and molding developed in industries such as powder metallurgy, ceramic powder, hard alloy, magnetic materials, and electrical contacts.

The ceramic powder molding hydraulic press adopts a four-beam four-column structure and a two-way pressure molding system, which makes the equipment run stably and reliably. The 315-ton four-beam four-column hydraulic press consists of three major parts: the main machine, the hydraulic system and the control mechanism, which are formed as a whole through pipelines and electrical devices. The main machine includes the fuselage, the main cylinder, the stroke limiter, etc. The control mechanism includes the electrical box, the mobile operating console, etc. The hydraulic system consists of a hydraulic pump station (power system). The ceramic powder molding hydraulic press has independent hydraulic and electrical systems, an automatic feeding and unloading device, and floating pressing, so that the molding density of the product is effectively controlled. It is equipped with an oil cooling device and a mechanical limiter to ensure the consistency of the product.

Actual shot of the 315-ton ceramic powder forming hydraulic press workshop:

315-ton ceramic powder forming hydraulic press workshop

315 ton four-beam four-column hydraulic press workshop test machine

Four-beam four-column powder forming hydraulic press

Ceramic powder pressed cake finished product

315 ton powder forming hydraulic press technical parameters:

Note: The above parameters are for reference only.

315 ton powder forming hydraulic press performance features:

1. The ceramic powder molding hydraulic press adopts PLC control and advanced molding processes of pre-pressing, floating pressing, post-pressing and pulling down to demould.

2. During the molding process, exhaust can be performed multiple times to eliminate the air contained in the blank and make the product density reach a certain value to reduce deformation and control sintering shrinkage.

3. It has a core rod driving mechanism, which can improve the uniformity of the density of the inner wall of the product and prevent the product from generating internal cracks during demoulding.

4. The key positions of the machine (powder adding height, pressing end position, demoulding position) are mechanically positioned with high repeatability.

5. The whole machine has a compact structure and adopts advanced and high-quality hydraulic electronic components, so it has a series of advantages such as sensitive and reliable action, safe and convenient operation, stable operation, low energy consumption, long service life and durability.

6. The parallelism and verticality can be controlled with high precision, the downward pressure is stable and there will be no warping.

7. Two-hand operation, with manual, automatic, up and down inch movement. Convenient for mold installation and correction.

Ceramic powder molding hydraulic press composition structure:

1. The main body of the ceramic powder forming hydraulic press is composed of an upper crossbeam, a slide block, a workbench, a column, a locking nut and an adjusting nut.

2. Main cylinder: The oil cylinder structure of this machine is a piston type oil cylinder, which consists of a cylinder body, a guide sleeve, a piston head, a piston rod, a lock nut, a connecting flange, a cylinder port flange, etc.

3. The travel limit device is located on the right side of the main machine body and consists of a bracket, a bumper and a travel switch.

4. The hydraulic system consists of energy conversion devices (pumps and cylinders), energy regulation devices (various valves) and energy transmission devices (oil tanks, pipelines).

5. Electrical control system

6. Lubrication system

7. Safety protection system

315-ton powder forming hydraulic press workshop test machine: