250 ton single column hydraulic press_single arm hydraulic press

250 ton single column hydraulic press, also known as 250 ton single arm hydraulic press, is an open C-shaped structure. It is a single column correction press, suitable for various tools, parts, press fitting, straightening, bending; sheet metal stamping, blanking, embossing and other processes. The machine's travel, work surface, pressure head size, work table height from the ground and other parameters can be designed and customized according to the customer's process requirements.

250 ton single column hydraulic press

Scope of application:

This series of single-column hydraulic presses are suitable for the correction of shaft parts and profiles and the press-fitting of sleeve parts. At the same time, it can also complete the bending, stamping, sleeve shaping, and stretching of simple parts of sheet parts. It can also be used to press powders and plastic products with less stringent requirements.

250 ton single arm hydraulic press performance features:

1. 250-ton single-arm hydraulic press YW41-250T single-column correction press has good structural rigidity, equipped with four-column guide, good guiding performance, fast speed, etc.

2. The solid open C-shaped structure with integral welding can keep the machine body rigid enough while providing a very convenient operating space. After welding, it is treated with vibration to ensure that the machine body does not deform. The oil cylinder and piston rod are made of high-quality 45# steel. The surface of the piston rod is chrome-plated after medium-frequency quenching, which is not easy to be scratched or rusted; the oil cylinder is sealed with high-quality sealing rings to ensure reliable sealing performance.

3. The hydraulic control adopts a two-way cartridge valve integrated system, which has reliable operation, long service life, small hydraulic shock, and reduces connection management and leakage points.

4. Convenient manual adjustment mechanism, which can adjust the pressure head or upper workbench to any position in the stroke, and can also adjust the length of fast forward and working stroke within the designed stroke;

5. Adopt independent electrical control system, which ensures stable and reliable operation, smooth movement and convenient maintenance.

6. The 250-ton single-column hydraulic press adopts button centralized control and has three operation modes: adjustment, manual and semi-automatic. The working pressure, no-load fast down and slow working stroke range can be adjusted according to process requirements.

7. PLC, grating protection, human-machine interface (touch screen), protective cover and other configurations can be added according to user requirements.

250 ton single arm hydraulic press

250 ton single column calibration press

250 ton single column hydraulic press technical parameters:

Equipment model: YQ41-250T

Nominal pressure: 2500KN

System pressure: 25Mpa

Slider stroke: 960mm

Maximum opening height: 1110mm

Workbench size: 1350*100mm

Slider area: 1350*100mm

Equipment safety protection measures:

1. Stop and emergency stop buttons: When an abnormality occurs, press the "stop" button to stop all operations of the press. Press the "emergency stop" button to stop all operations including the motor.

2. Use both hands to operate the buttons to prevent accidental operation with one hand.

Equipment working conditions:

1. Power supply: three-phase 380V (±10%), 50Hz.

2. Working environment temperature: -5～40℃, humidity: maximum 80%.