63 ton single arm hydraulic press

The 63-ton single-arm hydraulic press is also called a 63-ton single-column hydraulic press. It is mainly suitable for processes such as stretching, forming and pressing of metal products. It can also process non-metallic materials, press powder metallurgy products, calibrate shaft parts, press sleeve parts, and shape and trim metal products. The hydraulic press produced and processed by the 63-ton single-column hydraulic press has the characteristics of good structural rigidity, good guiding performance, and high speed. The convenient manual adjustment mechanism can adjust the pressure head or the upper workbench to press at any position in the stroke, and can also adjust the length of the fast forward and working stroke within the designed stroke. The hydraulic system is located inside the machine body, with beautiful appearance and easy operation. It can expand the working range and use the three-sided space to lengthen the hydraulic cylinder stroke (optional).

63 ton single arm hydraulic press

63 ton single arm hydraulic press technical parameters (for reference only):

Note: The above parameters are for reference only. For the actual parameters of the machine, please refer to the technical proposal of Mr. Shi from Shandong Woda Heavy Industry at 18963222388 (same number on WeChat).

Main structural features of 63 ton single column hydraulic press:

1. The fuselage is welded with high-quality steel plate by CO2 welding and is vibrated after welding to ensure that the fuselage does not deform.

2. The machine is equipped with independent hydraulic and electrical control systems, which adopt centralized button control, can realize two molding processes: fixed stroke and fixed pressure, and has functions such as pressure display and stroke and pressure adjustment.

The hydraulic system of the 3.63-ton single-column hydraulic press is located inside the machine body, with beautiful appearance and easy operation.

4. It has manual and foot operation modes.

The 5.63-ton single-arm hydraulic press can expand its working range according to demand, and use the space on three sides to lengthen the hydraulic cylinder stroke (optional), providing a very convenient operating space.

The tonnage of the pressing cylinder of the 6.63-ton single-arm hydraulic press is realized by a piston cylinder. The cylinder body is made of high-quality forged steel, and the surface of the piston rod is treated by medium-frequency quenching, with high hardness and long service life. The main seal of the cylinder adopts high-quality sealing ring to ensure reliable sealing.

In addition, according to user requirements, we can also configure imported PLC, grating protection and human-machine interface (touch screen) and other advanced components. For special requirements of customers, we can specially design and produce to meet the production process requirements of customers to the greatest extent.

63-ton single-column hydraulic locomotive actual picture:

63 ton single arm hydraulic press in stock

63 ton single column hydraulic press

63 ton single arm hydraulic press workbench

Installation and debugging:

1. Before leaving the factory, the 63-ton single-arm hydraulic press is assembled and debugged according to the assembly procedures, the hydraulic, electrical and other control systems are carefully checked, and a no-load test run is carried out as well as an overload test run as required.

2. The supplier is responsible for the on-site guidance of the purchaser for assembly and commissioning, and the purchaser provides lifting equipment (the cost of lifting equipment is borne by the purchaser). The supplier also provides technical training for the purchaser's personnel to enable the purchaser to master the structural performance, operation methods and analysis, judgment and elimination skills of common faults of the equipment.