800 ton frame hydraulic press_composite material hydraulic press

The 800-ton frame hydraulic press is a commonly used composite hydraulic press. It adopts a frame-type, three-cylinder structure design, equipped with a PLC servo numerical control system, a table of 2000*1500mm, an opening of 1800mm, and a stroke of 1400mm. It is suitable for the compression molding of some composite products such as plastics, resins, rubber, SMC, BMC, carbon fiber, etc. with larger workpieces, such as: plastic building molds, plastic anti-slip mats, U-shaped resin drains, composite cable trench covers, SMC auto parts, SMC air-conditioning shells, radiator shells and other products.

800-ton frame hydraulic press workshop

800T frame type composite hydraulic press

The 800-ton frame hydraulic press adopts an integral frame structure, and the integrally welded fuselage has good rigidity. The slider is guided by four-corner and eight-sided guide rails, with high adjustment accuracy and strong anti-eccentric load capability. Equipped with servo CNC system, it has low operating noise, smooth operation and more precise control. The pressure design of three stages of pre-pressing, molding and holding pressure is adopted and the pressure is scientifically allocated by time segmentation, which makes the energy efficiency of the equipment more significant, the molding pressure is high and reliable, and ensures the molding quality of composite products. The equipment High degree of automation, short production cycle and high production efficiency.

800 frame hydraulic press technical parameters:

Equipment model: YQ34-800T

Nominal pressure: 8000KN

System pressure: 25Mpa

Slider stroke: 1400mm

Opening height: 1800mm

Table size: 2000*1500mm

Control mode: PLC+servo

Note: The above parameters are for reference only.

800-ton composite hydraulic press customer site

800-ton frame hydraulic press installed in customer workshop

Features of 800 ton composite hydraulic press:

1. The 800-ton composite hydraulic press is mainly used for the integral compression molding of thermosetting (glass fiber reinforced plastic) plastic products and thermoplastic products, and is suitable for the compression molding of various agglomerates and sheets such as SMC, BMC, DMC, and GMT;

2. The 800-ton frame hydraulic press adopts a four-corner octagonal rectangular rail guide structure. The guide rail can be customized to lengthen the slide, increase the slide height, and increase the contact area between the slide guide sleeve and the column, with strong load resistance;

3. The 800-ton frame hydraulic press adopts a multi-cylinder structure design with even distribution, and the SMC composite material compression molding has stronger stability;

4. The mold can be closed quickly, and the molding can be performed by slow pressure in multiple stages, with reasonable time reserved for exhaust and vacuuming;

5. It has the function of high pressure slow mold opening, which is suitable for molding products with higher height;

6. The valve body is equipped with core pulling and pressure maintaining functions, and the frequency converter can realize the functions of fast down, slow down, slow return and fast return in the molding process;

7. The servo PLC control system responds quickly, the industrial touch screen is fully digitalized, and the servo oil pump is energy-saving;

8. Microcomputer closed-loop heating control system, equipped with mold temperature controller, optional electric heating or oil heating, mold heating is uniform, energy-saving;

9. It can be equipped with environmentally friendly gas collection hood or air curtain purification system, mold changing trolley, etc.

10. It adopts four-corner leveling closed-loop servo system control, with high pressure control accuracy and position control accuracy, uniform force on the mold and uniform texture of the molded product.

Optional accessories:

●Mobile workbench

●Punching buffer device

●Edge pressing slider, hydraulic pad, four corners pressure adjustment device (stretching asymmetric parts)

●Photoelectric protection device

●Floating guide rails and rolling brackets for mold change

●Mold quick clamping mechanism

●CNC device with digital display for stroke, pressure and speed

●Touch screen industrial display

●Hydraulic system heating and cooling device

●With pressure-maintaining delay function, the delay time is adjustable (optional)

●The electrical system adopts PLC control (optional).