SMC FRP water tank plate compression molding equipment_800 tons four-column hydraulic press

The 800-ton FRP water tank plate compression molding hydraulic press is a special production equipment for SMC FRP water tank plates. It is a model of composite material compression molding hydraulic press developed and produced by Shandong Woda Heavy Industry . FRP water tank plates are molded by hydraulic presses and molds, and have many advantages. Common FRP water tank plate molding hydraulic press models include 630-ton four-column hydraulic presses and 800-ton four-column hydraulic presses. The raw material of SMC FRP water tank is SMC composite material, that is, FRP sheet, which is placed in the mold cavity of the mold, heated and pressurized, and then molded, cooled, hardened, and burrs are removed to obtain a qualified finished product.

SMC FRP water tank refers to a water tank made of FRP fiber as raw material. FRP refers to plastic reinforced with glass fiber and its fabric, which is light and hard, non-conductive, with high mechanical strength and corrosion resistance. FRP (Fiberglass Reinforced Plastics, also known as GRP, Glass Reinforced Plastics, or Glass fibre reinforced plastics (GFRP)) is glass fiber reinforced plastic, generally refers to glass fiber reinforced unsaturated polyester, epoxy resin and phenolic resin matrix. Reinforced plastics with glass fiber or its products as reinforcing materials are called glass fiber reinforced plastics, or FRP.

1. Introduction to SMC FRP water tank

SMC fiberglass composite water tank is a new type of water tank widely used in the world. The unique performance of SMC fiberglass composite water tank solves the problems of heavy weight, easy leakage, easy moss growth of concrete water tank and easy rust of steel plate water tank and water pollution caused by anti-rust coating. It has the advantages of good water quality, no leakage, light weight, beautiful appearance, long service life and easy installation. SMC fiberglass composite water tank is suitable for public buildings such as industrial and mining enterprises, residential buildings, hotels and restaurants.

As domestic water, fire water, and water storage facilities for food, medicine, health, and other water with high water quality requirements, and various circulating water, cooling water, and hot water supply systems, there is no national standard for the service life of FRP. The factors that affect the service life of SMC FRP water tanks are mainly the following:

1. Material and thickness of SMC FRP water tank: The material of the water tank plate refers to the quality of the resin used, which is SMC special resin; the thickness of the water tank plate is determined by the height of the water tank plate, the higher the water tank, the thicker it is;

2. Installation of SMC FRP water tank: The installation process of FRP water tank and the success of water testing will affect the service life of the water tank;

3. The operating environment of the FRP water tank: The operating environment of the water tank includes the external environment and the water quality of the water. Excellent water quality significantly increases the service life of the water tank.

2. Precautions for installing SMC fiberglass reinforced plastic water tank

1. The water tank capacity can be freely selected from 0.125 tons to 1500 tons; the water tanks are all made of standard plate combinations, and there are usually three specifications: 1000mm*1000mm, 1000mm*500mm, and 500mm*500mm, so the design size of the water tank cannot be continuously changed, but should be designed based on 500mm;

2. A 300mm to 500mm high concrete foundation should be set at the bottom of the water tank, and there should be an assembly and maintenance space of no less than 500mm around and on the top of the water tank; the direction of the concrete foundation should be convenient for drainage pipes;

3. The concrete foundation of the water tank shall be constructed by the water tank purchaser. The concrete foundation plane construction error requirements are: the horizontality allowable deviation shall not exceed 2mm, and the diagonal length deviation shall not exceed 20mm;

4. The standard accessories of the water tank include: water inlet pipe flange, water outlet pipe flange, overflow pipe flange, sewage pipe flange, vent, manhole, internal and external ladders, etc. The positions of all pipe openings can be specified on site, but the relevant pipe diameter and quantity should be specified in advance when the user places an order;

Shandong Shandong Woda Heavy Machinery  Tool Co., Ltd. is a company focusing on the research and development, production and service of large and medium-sized forging machine tools. It has an annual output value of nearly 200 million yuan and a plant area of ​​more than 30,000 square meters. Its main products include three-beam four-column hydraulic presses, four-beam four-column hydraulic presses, single-column hydraulic presses, gantry hydraulic presses, frame hydraulic presses, powder forming hydraulic presses, metal stretching hydraulic presses, FRP die-casting hydraulic presses, composite material die-casting hydraulic presses, hot die forging hydraulic presses, hydraulic punches, press-fit straightening machines and various supporting molds (punching, stretching, die-casting, forging), etc. Its customers cover more than 300 cities in China and overseas regions such as Central Asia, Europe, Africa, and South America. Contact number: 18963222388